Setting Memory Seats and Mirrors in a 2007 Lincoln MKX: Step-by-Step

To program the memory positions for the driver's seat and outside mirrors on a 2007 Lincoln MKX:

1. Ensure the vehicle is in Park (P) and the engine is running (or ignition ON/RUN).
2. Adjust the driver's seat (position, height, tilt, lumbar) and outside mirrors to your preferred positions using the power controls.
3. Press and hold the "SET" button on the driver's door memory panel (marked 1 and 2) until you hear a chime or see the indicator light illuminate (~1–2 seconds).
4. Within 5 seconds, press memory button "1" or "2" corresponding to the desired slot. A second chime confirms storage.
5. Repeat for the second driver using the other button.

To Recall

• Press and release the desired memory button (1 or 2). Seat and mirrors will move to stored positions.
• Works only in Park (or with ignition off, depending on settings).

Notes

• Memory also stores adjustable pedals (if equipped) and steering column (if power tilt/telescope).
• If battery is disconnected, memories may be lost — reprogram.
• Refer to owner's manual for model-specific nuances.