Safely Disconnecting Airbags on a 2000 Lincoln LS

⚠ Airbag work is hazardous. Only trained technicians should perform this. If absolutely necessary:

1. Battery negative disconnected; wait 10+ minutes for capacitor discharge.
2. Remove steering column shrouds for driver’s airbag; disconnect yellow connector at back of airbag module (push locking tab).
3. Passenger airbag: remove glovebox/trim; disconnect connector atop unit.
4. Side/curtain airbags: remove appropriate pillars/headliner sections; disconnect each.
5. Reassemble trim; reconnect battery; verify no SRS light with scan tool.

Improper handling can cause accidental deployment (injury) or persistent fault codes. Professional service is strongly recommended.