How to Install a Regulator for Propane Tanks on an RV Trailer
A regulator is a piece of equipment that controls gas pressure to appliances. Some RVs have an automatic changeover regulator which automatically switch tanks when one is empty. These regulators are usually mounted on top of the LP tank. Automatic regulator tanks may not come in every RV, but they are an easy installation for even the least handy person.
- Adjustable wrench
- Soap/water spray
Show More
Instructions
-
-
1
Turn off all appliances and put out all pilot burners.
-
2
Turn the nut on the regulator to the right with a wrench and remove the original regulator.
-
-
3
Attach the new regulator by turning the threads with a wrench to the left. Tighten the nut. Slowly open the valve on the cylinder.
-
4
Spray the soap and water on the valve and look for bubbles to check for leaks. Tighten the valve if there is a leak.
-
5
Relight the pilot lights and test the burners to see that they are working.
