How do you reset Mahendra Scorpio Nippon remote central locking?

Step 1: Disarm the Immobilizer

- Insert the key into the ignition switch and turn it to the "ON" position.

- Quickly turn the key back to the "OFF" position and remove it from the ignition.

- Repeat steps 1 and 2 twice more, within 3 seconds.

Step 2: Enter Programming Mode

- Open the driver's door and enter the vehicle.

- Press and release the interior dome light button three times.

- The hazard lights will flash, indicating that you've successfully entered programming mode.

Step 3: Reset the Receiver

- Press and hold the "Lock" button on the key remote for 3 seconds.

- Release the "Lock" button.

- Press and hold the "Unlock" button on the key remote for 3 seconds.

- Release the "Unlock" button.

- The hazard lights will flash twice to confirm that the receiver has been reset.

Step 4: Exit Programming Mode

- Press the interior dome light button once.

- The hazard lights will flash, indicating that you've successfully exited programming mode.