Warren Truss Bridge: Rigid Triangles That Carry the Load
The Warren truss is a bridge support system built from **equilateral (or isosceles) triangles** of rigid members—alternating compression and tension diagonals with no verticals in the classic form. It's one of the most efficient, widely used truss types for spans 50–250 m.
Structural Anatomy
- Top chord: Compression (horizontal or slightly arched).
- Bottom chord: Tension (horizontal).
- Diagonals: Alternate compression / tension (no verticals in pure Warren).
- Nodes: Pinned (idealized) or rigid (welded/bolted) — rigid joints add moment capacity.
Variants
- Warren with verticals: Adds verticals at panel points — reduces buckling length of top chord, handles concentrated loads better. Most real bridges use this.
- Subdivided Warren: Extra diagonals splitting panels — for longer spans / heavier loads.
- Double Warren: Two parallel truss planes with cross-bracing — railway bridges.
Why It Works
| Advantage | Mechanism |
| Efficient material use | Triangles = pure axial forces (no bending in ideal pin-jointed) |
| Load distribution | Forces spread across many members |
| Minimal deflection | High stiffness-to-weight |
| Aerodynamic | Open web = low wind drag |
| Prefabrication | Repetitive panels = shop fabrication, rapid erection |
| Inspectability | All members visible |
Famous Examples
- Sydney Harbour Bridge approaches (Warren with verticals).
- I-35W St. Anthony Falls Bridge (Minneapolis) — post-collapse replacement, precast concrete Warren.
- Countless railway bridges (UK, India, Australia, US) — standard gauge, Cooper E80 loading.
- Pedestrian bridges: Lightweight steel/aluminum Warren — parks, campuses.
Design Considerations
- Buckling of compression diagonals (slenderness check).
- Fatigue at nodes (welded details).
- Redundancy: non-load-path members (verticals in pure Warren) = fracture-critical if omitted.
- Camber for dead load deflection.
The Warren truss: geometry doing the work. Triangles don't lie—and they don't bend.