* Replacement headlight bulb (check owner's manual for specific type)
* Socket wrench set
* Phillips head screwdriver
* Flat head screwdriver
* Flashlight
Instructions
1. Open the hood.
2. Locate the headlight assembly. It is located behind the plastic cover on the front of the car.
3. Remove the plastic cover by removing the screws that hold it in place.
4. Locate the headlight bulb. It is located inside the headlight assembly.
5. Disconnect the electrical connector from the headlight bulb.
6. Remove the old headlight bulb by turning it counterclockwise.
7. Insert the new headlight bulb by turning it clockwise.
8. Reconnect the electrical connector to the headlight bulb.
9. Replace the plastic cover and secure it with the screws.
10. Close the hood.
Tips
* Be careful not to drop the headlight bulb. If it breaks, it could cause injuries.
* If you have difficulty removing the plastic cover, you may need to use a flat head screwdriver to pry it off.
* Be careful not to overtighten the screws that hold the plastic cover in place.
