# Travel >> Travel Preparation >> Travel Gear

How to Build a Mosquito Net Frame

For anyone who has ever been camping, you know that getting a good night's sleep is usually dependent on keeping the bugs out of your bed. This simple PVC frame can be easily packed into your camping gear and assembled at the campsite in just a few minutes. It works well with both a fold up cot or set up over your sleeping bag.

3/4 inch PVC pipe, cut into the following lengths: 4 @ 42 inches each, 4 @ 30 inches each, 4 @ 36 inches each, 4 @ 4 inches each
4 each - 3/4 inch PVC "T" sections
2 each - 3/4 inch PVC Straight connectors
8 each - 3/4 inch PVC 90 degree "Elbows"
1 bar, unscented bar soap
Mosquito netting

Instructions

How to Build a Mosquito Net Frame
- 1
  Begin by using the bar soap to coat the inside of the "elbow", "T" and straight connectors. This will help the pieces slide together easier.
- 2
  Lay out the pieces on the ground to match the drawing.
- 3
  Begin assembly by connecting the corners and "T" sections to the appropriate straight sections.
- 4
  Assemble the 'square' ends of the frame first, and then connect the two end sections with the long straight sections.
- 5
  Position the frame over your cot or sleeping bag and drape the mosquito netting over the frame.