How to Fill Grill LP Tanks From a Bulk Tank

Today's gas grills use small LP tanks to fuel the fire. Safety should be your utmost concern when it is time to refill the tank. Even when the tank is empty, residual LP gas remains in the tank.

While there are many places to exchange an empty tank for a full one, it is more cost effective to have your tank refilled at a bulk distributor. It is just a matter of disconnecting your tank, transporting it safely, filling it and reconnecting to be ready for grilling.

Things You'll Need

  • Crescent wrench
  • Soapy water
Show More

Instructions

    • 1

      Close the valve on the top of the LP tank. Use the crescent wrench to remove the connection from the regulator. If you smell the rotten egg smell of LP Gas, double check that the valve on the tank is closed all the way.

    • 2

      Transport the LP tank to the bulk refill station. The tank must be secured in an upright position. This will keep any remaining gas from escaping through the vent. Preferably, use a pickup for transportation, though you can safely transport the LP tank in the trunk of your car. Always carry the LP tank by the handles and never by the valve.

      When the LP tank is filled, re-secure in the vehicle it for transport back to your home.

    • 3

      Reconnect the LP tank to the grill. Check that the hose between the regulator and tank does not have any kinks. Open the tank valve only two turns on the valve. Use the soapy water to dampen all the connections. If you see any bubbles forming, close the valve completely and re-tighten any loose fittings.

      If you see no bubbles from the soapy water, it is safe to open the valve fully.

Copyright Wanderlust World © https://www.ynyoo.com