Travel >> Transportation >> RV

How do I Light the Gas Pilot Light on a Wedgewood by Atwood Oven?

Atwood manufactures the Wedgewood line of appliances for installation and use in recreational vehicles (RVs). The Wedgewood ovens are gas ranges with four burners and an oven for the same convenience as in a home. There are three types of pilot lighting systems in these ovens, including manual, spark ignition and electronic ignition. Each of the three differs in the pilot lighting process with the same conditions of gas, air and spark to light the fire.

Things You'll Need

  • Kitchen match
Show More

Instructions

  1. Manual Lighting Models

    • 1

      Turn the gas shutoff valve counterclockwise to turn the gas on to the appliance.

    • 2

      Strike a kitchen match or spark igniter and hold it near the burner port. The burner port is the end of a burner tube near a top burner or oven burner.

    • 3

      Push the burner or oven knob in and turn it counterclockwise to the "On" or "Lite" position. As soon as the gas reaches the match flame or the igniter spark, the burner will light.

    Spark Ignition Models

    • 4

      Turn the gas shutoff valve counterclockwise to turn the gas on to the appliance.

    • 5

      Push in and turn the top burner or oven knob counterclockwise to the "On" or "Lite" position.

    • 6

      Turn the "Spark" knob clockwise and hold it in this position until the burner lights. There will be an audible clicking noise from the spark igniter to light the gas and the burner.

    Electronic Ignition Models

    • 7

      Turn the gas shutoff valve counterclockwise to turn the gas on to the appliance.

    • 8

      Push in and turn the top burner or gas burner knob counterclockwise to the "On" or "Lite" position.

    • 9

      Hold the knob in this position for five seconds for the electronic igniter to light the burner with an electronic spark.

Copyright Wanderlust World © https://www.ynyoo.com