How to Install a Water-Heating Element in an RV

After a cold swim or hike there is nothing like a warm shower. A hot water heater is one of the best and most useful luxuries of traveling with an RV. A water heater cannot run without the proper heating elements. Water heater elements heat the water so you have hot water for your showers and dishes. When the heating element starts to go bad, replacing it is an easy enough job to do by yourself.

Things You'll Need

• Multimeter
• Screwdriver (will vary based on model)

Show More

Instructions

1. • 1

     Turn the water running to the heater off. Find the A/C wires that go to the heater and disconnect these wires.

   • 2

     Test the element with a multimeter to check for continuity.

   • 3

     Unscrew the four screws holding the element in place with the screwdriver and remove the element.

   • 4

     Place the new element in the place of the old one. Screw the new element into place.

   • 5

     Turn the water back on and check for leaks.