Turn on your computer and the attached printer. Make sure the cable connecting the printer to the computer is securely attached at both ends.
Open the images you wish to make into tank stickers. In the program of your choice, choose the size you want each sticker to be and how you want them to be placed on the decal page.
Click on the “File” option and then “Print” in the program you are using. Make sure there is printer paper in the printer to print a test page on. Examine how the images printed onto the printer paper, including making note which side of the page the images were printed on. Make any changes you desire.
Remove all the paper from the printer. Place a printer decal sheet in the printer’s feed tray, placing the non-adhesive side so it will be printed on. Send the images on the computer to be printed the same way you printed the test page. Be careful when first handling the printed decal sheet since the ink may still be wet.
Cut the images out of the decal sheet with some scissors. To make precise cuts, place the decals on a hard surface and use the utility knife. Peel away the backing on the decals and press them onto the tank on your motorcycle.
