How to Light a New Hydro Flame Furnace in a RV
RV water heaters are a creature comfort that you don't get when just tent camping. A common water heater model in RV units is the Hydro Flame Furnace. This water heater is fueled by propane, but keep in mind some other models can also operate with 120 volt AC. Anytime the Hydro Flame Furnace is turned off, it must be re-lit. Re-lighting a Hydro Flame Furnace is not difficult.
Instructions
-
-
1
Turn the LP gas to the Hydro Flame Furnace on.
-
2
Check to see that your RV's battery is fully charged.
-
-
3
Turn the gas valve to the position saying "Pilot." On some models it will have to be pushed and held in while lighting it with a match.
-
4
Hold the button in until the gas flame burns brightly.
-
5
Turn the valve to the "on" position.
